We manufacture anodes to accommodate customers' connection requirements, including both established industry standards methods and special custom designs whenever warranted by demand. Typical features are:
Type A:
Cast groove in hollow anode interior accepts customers' snap ring connector or caulked lead.Type S:
Cast cavity in anode end accepts caulked lead connections.Type T:
Cast conical seat in tubular anode accepts our conical lead anchor soldered to cable.
"Chill Cast" in Metal Molds
Assures consistent weight, greater density, less flake graphite grain boundary, and lower chemical segregation than Sand Cast Anodes. Our Chill Cast structure is similar to "Spin Cast" Tubular Anodes. (Shell Cast Anodes are available on application.)Performance
Accelerated corrosion tests confirm that our Chill Cast Anodes perform significantly better (up to 19%) than sand cast anodes in chloride and sulfate environments. Test reports are available on request.High Silicon Cast Iron Anodes
Type | Shape |
Connection Features |
Nominal Dimensions inch (mm) |
Nominal Area sq ft (sq m) |
Nominal Weight lbs (kg) |
|
---|---|---|---|---|---|---|
Diameter | Length | |||||
1F9-S | Solid rod | Type S, caulked lead | 1.1 (28) | 9.0 (229) | 0.24 (0.022) | 2.0 (0.91) |
15K12‑S | Solid rod | Type S, caulked lead | 1.5 (38) | 12 (300) | 0.39 (0.036) | 5.2 (2.4) |
2009 |
Hollow tube duct anode |
Caulked lead or press fit bronze insert | 2 (51) | 9 (230) | 0.39 (0.036) | 4.6 (2.1) |
2212 Z | Hollow tube | Conical seat zinc anchor swaged for single or string connection | 2.2 (56) | 12 (300) | 0.6 (0.056) | 6.2 (2.8) |
2224 Z | 2.2 (56) | 24 (600) | 1.1 (0.102) | 14.8 (6.7) | ||
2242 Z | 2.2 (56) | 42 (1060) | 2.0 (0.185) | 25 (11.4) | ||
2248 Z | 2.2 (56) | 48 (1220) | 2.3 (0.213) | 29 (13.1) | ||
2624 Z | Hollow tube | Conical seat zinc anchor swaged for single or string connection | 2.6 (66) | 24 (600) | 1.3 (0.120) | 20 (9.1) |
2642 Z | 2.6 (66) | 42 (1060) | 2.4 (0.222) | 36 (16.3) | ||
2648 Z | 2.6 (66) | 48 (1220) | 2.7 (0.250) | 41 (18.6) | ||
Button | Hemispherical "button" with bolt hole |
Type S, on base caulked lead |
6 (150) | 3 (76) | 0.33 (0.030) | 18 (8.2) |
Bullet | Condenser "bullet" anode | Threaded steel stud | 3 (76) | 6 (150) | 0.5 (0.046) | 12 (5.5) |
12B15 | Bridge deck "pancake" anode | Type S, caulked lead | 12(300) | 1.5 (38) | 1.1 (0.102) | 40 (18.1) |
Tag: MMO Tubular Anodes for Cathodic Protection System | MMO Tubular Titanium Anode for Cathodic Protection | Tubular MMO Anode | Tubular Anode for CP
Tag: Titanium Wire Anodes | Wire Anodes for Cathodic Protection | Wire Anode for CP | Wire Anode